Відео

You just saved me $3k!

Great video.If it turns to a random side, does it mean it will fall on a programmed random side, or is the random element the orientation change and then it follows the game physics?

Watched this a few times and tried to play with my grandson but just can’t get it. Is there a video that shows someone actually playing the game so I can see how it works? I want to be able to play it but the frustration level is high.

Your buddy ruined it with gasoline and then your wife drove over the repair? Somebody buy this man a few rounds. 🍻

Great video! Your graphics were very helpful

Thanks for the teach but also what product do you use in your hair

Thank you

OK...I fixed this problem in my GE Profile Microwave oven this way. There are three microswitches, one above the other. The two upper microswitches are wired to normally open and normally closed. The bottom one, which has that extra cam is not the one which usually fails. When the door is closed, they switch over. The problem is that if the door is not totally square to the front of the oven, or it twists, the switches have a chance to not activate consecutively and form a dead short which blows the breaker. I got sick of this problem and got a DPDT limit switch, cut a hole in the upper part of the grid over the removable plastic box for the wiring and mounted the switch in a way, that when the door is closed, the switch is activated. ONE SWITCH ACTIVATION CONTACT POINT, not TWO to throw the switch. That way the twist in the door is irrelevant. I then got male spade connectors and put them in the connectors for the NO and NC switch connectors and wired the outputs to the new switch NO and NC connections (4 points, total) with short lengths of wire. This switch breaks before make and that function is the secret to why it will reliably work. It works great. I used a limit switch from an old molding machine. A Square D switch or other type of 2p2t snap action switch could be used and bracketed into the front of the microwave neatly. The switches have to be rated at least 10 amps at 120VAC. If you do this, don't do it sloppy. Your wife will get pissed at you. This is an inherent design flaw in this microwave. The way I fixes retains the safety interlocks and eliminates the problem of door and hinge twist. You GE folks should take notes. Doing it cheap is not necessarily doing it OK....and yes, I am going to be smug about it.

Im doing an install video for a hand Rail similar to the one you did. Im being paid to do a review on it, Mine had horrible instructions and I had to take it apart becausev I for got to out the Caps for the bottom on. I make videos everyday and this hand rail video Im doing has me feeling out of place.... I make videos about satirical type stuff and People Failing or falling. Im not use to making regular content.... Goid video

I had poison ivy so bad when i was a young kid, my eyes were closed shut. My mom used boric acid so i could open my eyes.

Awesome. Just what I was looking for. The screw and washer on mine fell out, do you happen to know the size of the screw? Thank you!

most help I have received - its kinda complicated.

Very well done. Would like another one that talks more about cover and saves.

Damn this video is informative and impressive views

Thanks boss

I forgot the exact number but I read that three out of four people aren’t allergic to urushiol, the agent that causes the rash.

I used to get it real bad as a kid now I barely get it at all. Some people literally take baths with it to build immunity for landscaping i know a guy personally who did it and he never gets it anymore.

Helpful. Thank you

I would have put the top post on the next step and then equally spaced them

Great experiment. Too bad you can't build up an immunity to urushiol (the oil). The more exposure, the more susceptible you are to it as your body tries harder to fight it off.

Nice work.

This was incredibly helpful 🙏

1:04:20 FP should have rolled with 5 die because of aragorn and boromir captain of the west ability.

49:27 you used 4 dice to move the fellowship, so the shadow should have put 4 eyes in the hunt box automatically.

45:25 I thought you used advantageous position and he hits on 6s and not 5s? He should have got 2 hits not 4 right?

18:07 you could have moved them all the way to Dol Amroth instead

Hi do you still play pubg

Wow that’s so helpful thanks for such a informative and well spoken video

If I play Black Captain, can I leave witch king in reserved?

Thank you for this review!! I knew something was off about those etsy models

No way, I will not support Birchbury due to the past actions of the founder.

Bravo! Very clear explanations. Exactly what I needed...

The Turkish ones look much better but def look a little sus quality wise. I’m not super into barefoot shoes… I just want a regular shoe that has a toe box that is more similar to a barefoot toe box.

THANK YOU SO MUCH!!! Saved me a long and painful attempt to use warranty with Thule

Wow! Wish I knew about this 15 years ago! 5 minutes and permanently fixed. Thank you.

Had the same issue this weekend. This was the perfect fix, thank you!!

You should put a Zeus in your bag thank me later

Everyday essentials has an issue fitting Olympic bars and holders. They go on fine but dont come off easy. The tolerance of the weight being a few pounds off is pretty common for budget plates in general. Even moving up to a better know cheaper brand like titan or cap will yield the same issue. Iron plates are the cheapest option for stuff commonly in a titghter tolerance or shell out for calibrated plates.

Great tutorial! Thank you!

Very helpful video, but I went with electrical tape for the shim rather than something flammable... 😅

I’ve been interested in the Birchburies and Carats, but I’m concerned about durability. For those prices in a dress shoe, you can get a very high quality shoe that is stitched sole and can be resoled. I’m assuming these cannot be resoled and I’ve had mixed experiences with barefoot shoes where they are only glued to the sole, not stitched. I’ve had brands where the adhesive falls apart in six months or less. I’d be interested to see you longer term review.

I was scared when it was hard to push the clip back down. I guess thats normal 😅

Some people may want to close their microwave while pressing the release lever to stop the loud door latch click, but this will/can cause the switch to be pressed back further without a shim stopping it from working the next time. Cheers

43.2 lbs means they're light by 4%. Not very good tolerance there.

FYI, that is a SDS drill bit, it fits an SDS drill (go figure).

I bought a pair of those Feelbarefoot shoes and mine are much better made than the ones you show here. Everything is cut more cleanly, stitched better, the leather soles are at least twice as thick (took several wears to break in, etc. That is strange that the quality can vary that much. Sorry you had that experience.

Who is this guy? I like him. Subscribed.

Awesome worked perfectly wished have seen this 4 years ago saved me 4 new batteries

This is just silliness. Get a decent pair of Allen Edmonds or Carmina Goodyear welted shoes & some quality over the calf dress socks.

lovely review thank you